BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.51 hwVPNIPv6PoolUsageReachThreshold
Trap Buffer Description
The IPv6 address usage of the vpn reached the threshold.(VPNInstance=[VPNName],Threshold=[threshold])
The IPv6 address usage of the vpn reached the threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwVPNIPv6PoolUsageReachThreshold |
Trap OID |
1.3.6.1.4.1.2011.6.8.2.2.0.51 |
MIB |
HUAWEI-IPPOOL-MIB |
Alarm ID |
0x0ae9204f |
Alarm Name |
hwVPNIPv6PoolUsageReachThreshold |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
BRASAM_1.3.6.1.4.1.2011.6.8.2.2.0.52 hwVPNIPv6PoolUsageReachThresholdResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
VPNName |
Name of a VPN instance. |
threshold |
Alarm threshold for the IPv6 address usage. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.6.8.2.1.12 |
hwPoolVPNInstance |
- |
1.3.6.1.4.1.2011.6.8.2.1.13 |
hwVPNPoolThreshold |
- |
Procedure
1.Increase the number of assignable IPv6 addresses using the section command in the view of the address pool bound to the VPN instance, bind more IPv6 address pools to the VPN instance, or set a larger alarm threshold for the IPv6 address usage of the address pools bound to the VPN instance using the ipv6-pool warning-threshold threshold command in the VPN instance view. Then check whether the trap message is cleared.
-If the trap message is cleared, go to Step 3.
-If the trap message persists, go to Step 2.
2.Collect trap, log, and configuration information and contact Huawei technical support engineers.
3.End.