The number of EAP user resources on the device reaches the upper threshold. (EapTotalMaxUserThreshold=[Threshold])
The number of EAP user resources on the device reaches the upper threshold.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwEapUserTotalMaxNum |
Trap OID |
1.3.6.1.4.1.2011.5.25.40.4.3.2.0.4 |
MIB |
HUAWEI-BRAS-SRVCFG-EAP-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
Threshold |
Max Threshold. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.40.4.3.1.5 |
hwEapUserTotalMaxNumThreshold |
- |
1. Send a login request for relogin.
2. If the user still cannot go online, the number of online users on the device has reached the upper limit. Log out some online users to allow the user to go online.
3. Check whether the alarm is cleared.
4. Collect alarm, log, and configuration information, and contact technical support personnel.
5. End.