CONFIGURATION_1.3.6.1.4.1.2011.6.10.2.1 hwcfgmaneventlog

Trap Buffer Description

Configuration file was changed. (LogIndex=[LogIndex], SrcCmd=[SrcCmd], SrcData=[SrcData], DestData=[DestData], TerUser="[TerUser]", SrcAddr=[SrcAddr], ConfigChangeId=[ConfigChangeId], LogTime=[LogTime], CfgBaselineTime="[CfgBaselineTime]")

The configuration file is changed.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Informational
Mnemonic Code	CFG_FILE_CHANGE
Trap OID	1.3.6.1.4.1.2011.6.10.2.1
MIB	HUAWEI-CONFIG-MAN-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
LogIndex	Log index.
SrcCmd	Methods in which the configuration change is triggered. 1: Command lines 2: Network Configuration Protocol (NETCONF) 3: Simple Network Management Protocol (SNMP) 4: Others.
SrcData	Source of the configuration change. 1: The configuration file is deleted. 2: The configuration file is saved, deleted, renamed, or moved. 3: The SNMP/CLI/NETCONF configuration is changed. 4: The configuration is restored. 5: A non-configuration file is renamed or moved. 6: Files are downloaded or uploaded using FTP. 7: The device is hot swapped.
DestData	Objects to which the configuration change is applied. 1: Unknown 2: Running configuration 3: Tools such SNMP/CLI/NETCONF 4: Configuration file for startup 5: Non-configuration local file 6: FTP 7: Hot swapping.
TerUser	Terminal users during the configuration change If an automatic saving operation triggers a configuration change, the user name "_SYSTEM_" is displayed.
SrcAddr	Source address.
ConfigChangeId	ID of a configuration change.
LogTime	Time when the configuration changes. That is the number of ticks produced from the system start to now.
CfgBaselineTime	Baseline time when configuration changes. For example, the system refreshes the time when being restarted.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.10.1.1.7.1.3	hwCfgLogSrcCmd	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.4	hwCfgLogSrcData	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.5	hwCfgLogDesData	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.7	hwCfgLogTerminalUser	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.10	hwCfgLogCmdSrcAddress	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.15	hwCfgLogConfigChangeId	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.2	hwCfgLogTime	hwCfgLogIndex
1.3.6.1.4.1.2011.6.10.1.1.7.1.16	hwCfgLogCfgBaselineTime	hwCfgLogIndex

Impact on the System

Services will not be affected.

Possible Causes

Cause 1: Save the configuration file.

Cause 2: Set the next boot configuration file.

Cause 3: Clear the next boot configuration file.

Procedure

This log is generated when configuration file is changed. No action is required.