L2 loop detect cleared, the loop on an interface has cleared. (ChassisID=[ChassisID], SlotID=[SlotID],Interface Name=[IfName], VlanID=[VlanID].)
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwBaseSecApplicationL2LoopOcurred |
Trap OID |
1.3.6.1.4.1.2011.5.25.165.1.11.14 |
MIB |
HUAWEI-SECURITY-MIB |
Alarm ID |
0x09e02022 |
Alarm Name |
hwBaseSecApplicationL2LoopOcurred |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Clear |
Match trap |
DEFEND_1.3.6.1.4.1.2011.5.25.165.1.11.9 hwBaseSecurityStormControlInterface |
| Parameter | Description |
|---|---|
ChassisID |
Chassis ID of the interface where a loop occurs. |
SlotID |
Slot ID of the interface where a loop occurs. When a device works in 1:1 backup mode, the slot ID is displayed as 0. |
IfName |
Name of the interface where a loop occurs. |
VlanID |
ID of the VLAN that the interface joins. If the interface is a member of a VLANIF interface, the VLANID value ranges from 1 to 4094. If the interface is not a member of a VLANIF interface, the VLANID value is 0. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.165.1.13.1.1.1 |
hwBaseSecurityStormControlInterfaceChassisId |
hwBaseSecurityStormControlInterfaceChassisId hwBaseSecurityStormControlInterfaceSlotId |
1.3.6.1.4.1.2011.5.25.165.1.13.1.1.2 |
hwBaseSecurityStormControlInterfaceSlotId |
hwBaseSecurityStormControlInterfaceChassisId hwBaseSecurityStormControlInterfaceSlotId |
1.3.6.1.4.1.2011.5.25.165.1.13.1.1.3 |
hwBaseSecurityStormControlInterfaceName |
hwBaseSecurityStormControlInterfaceChassisId hwBaseSecurityStormControlInterfaceSlotId |
1.3.6.1.4.1.2011.5.25.165.1.13.1.1.4 |
hwBaseSecurityStormControlInterfaceVlanID |
hwBaseSecurityStormControlInterfaceChassisId hwBaseSecurityStormControlInterfaceSlotId |