DEVM_1.3.6.1.4.1.2011.5.25.157.2.155 hwOutputErrorAlarm

Trap Buffer Description

Output error alarm.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot],CardID=[hwPhysicalPortInCard],PortID=[hwPhysicalPortInPort],InterfaceName=[hwPhysicalPortName])

An alarm is generated when the number of alarms is set higher than the set time.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwPhysicalPortOutputError
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.155
MIB	HUAWEI-PORT-MIB
Alarm ID	0x08130076
Alarm Name	hwOutputErrorAlarm
Alarm Type	processingErrorAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.156 hwOutputErrorAlarmResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Interface index(es) of physical port(s) present on the device.
hwPhysicalPortInSlot	Slot ID
hwPhysicalPortInCard	Card ID
hwPhysicalPortInPort	Port ID
hwPhysicalPortName	Port name

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6	hwPhysicalPortInSlot	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7	hwPhysicalPortInCard	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8	hwPhysicalPortInPort	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

Some of the traffic data on that port is discarded.

Possible Causes

Cause 1: The optical module failed.
Cause 2: The optical fiber failed.

Procedure

1.Replace the optical module and check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 2.

2.Replace the fiber, check whether the alarm is cleared.

If so, go to Step 4.
If not, go to Step 3.

3.Collect the alarm information, log information, and configuration information, and then contact technical support personnel.

4.End.