Auto-negotiation failure alarm. (IfIndex=[hwPhysicalPortIfIndex],IfName=[hwPhysicalPortName])
The alarm generated when an interface auto-negotiation failed.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Alert |
Mnemonic Code |
hwNegotiationFailedAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.157.2.205 |
MIB |
HUAWEI-PORT-MIB |
Alarm ID |
0x080121d1 |
Alarm Name |
hwNegotiationFailedAlarm |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.157.2.206 hwNegotiationFailedAlarmResume |
| Parameter | Description |
|---|---|
hwPhysicalPortIfIndex |
Index of a physical interface |
hwPhysicalPortName |
Name of a physical interface |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 |
hwPhysicalPortIfIndex |
hwPhysicalPortIfIndex |
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 |
hwPhysicalPortName |
hwPhysicalPortIfIndex |
Causes 1: Auto-negotiation configurations at the local end are inconsistent with those at the peer end.
Causes 2: The local ability of speed configuration and duplex configuration is not compatible with the peer.
Causes 3: The physical connection between the local and peer ends is unstable.
1.Check whether auto-negotiation configurations at the local end are consistent with those at the peer end.
2.Check the local speed configuration and duplex configuration is fit to the peer inconsistencies or not.
3.Check whether the physical connection between the local and peer ends is normal.
4.Collect alarm information, log information and configuration information, and then contact technical support personnel.
5.End.