DEVM_1.3.6.1.4.1.2011.5.25.157.2.270 hwFlexEPhyLocalFaultAlarm

Trap Buffer Description

The local fault alarm of FlexE physical interface has occurred.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

The local fault alarm of FlexE physical interface has occurred.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwFlexEPhyLocalFaultAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.270
MIB	HUAWEI-PORT-MIB
Alarm ID	0x00F101d9
Alarm Name	hwFlexEPhyLocalFaultAlarm
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.271 hwFlexEPhyLocalFaultAlarmResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1	hwPhysicalPortIfIndex	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

Services may be switched or interrupted.

Possible Causes

The received data is abnormal.

Procedure

1.Check whether the connected FlexE physical interfaces all work in FlexE mode.

If so, go to Step 3.
If not, go to Step 2.

2.Switch the connected FlexE physical interface to FlexE mode. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 3.

3.Collect alarm information, log information and configuration information, and then contact technical support personnel.

4.End.