The physical entity was installed unstably. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapEntType=[EntityTrapEntType], EntityTrapFaultID=[143362], Reason=The fan was installed unstably.)
A physical entity, such as a board, a power module, or a fan module, was installed improperly.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwUnstableAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.10.11 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x0813000f |
Alarm Name |
hwUnstableAlarm |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.219.2.10.12 hwUnstableResume-143362 |
| Parameter | Description |
|---|---|
EntityPhysicalIndex |
The index for this entry. |
EntPhysicalIndex |
Physical Index. |
EntityTrapEntType |
The textual name of the physical entity. |
EntityTrapFaultID |
To describe the fault id of trap. |
EntPhysicalName |
The index for this entry. |
Reason |
Reason. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.1 |
hwEntityPhysicalIndex |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.2 |
hwEntityTrapEntType |
- |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |
1.Check if the fan is properly installed, if pins have bent, and if the fan connectors become faulty.
2.If the fan is not properly installed, re-install it.
3.If the pins on the backplane have bent, do not install a new fan into the faulty slot. Collect the information about alarms, logs, and configurations, and then contact technical support personnel.
4.If only the fan connectors are found faulty, replace the fan with a new one.
5.If services on the fan are abnormal, collect the information about alarms, logs, and configurations, and then contact technical support personnel.
6.End.