The ambient voltage is abnormal. (EntityThresholdType=[EntityThresholdType], EntityThresholdValue=[EntityThresholdValue], EntityThresholdCurrent=[EntityThresholdCurrent], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])
The ambient voltage was abnormal.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwVoltAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.10.5 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x0813004a |
Alarm Name |
hwVoltAlarm |
Alarm Type |
environmentalAlarm |
Raise or Clear |
Raise |
Match trap |
| Parameter | Description |
|---|---|
EntityThresholdType |
The abnormal type. |
EntityThresholdValue |
The threshold value. |
EntityThresholdCurrent |
The current value. |
EntityTrapFaultID |
To describe the fault id of trap. |
Reason |
Reason. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.5.1.1 |
hwEntityThresholdType |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.5.1.2 |
hwEntityThresholdValue |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.5.1.3 |
hwEntityThresholdCurrent |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |
1. Check the reason and check whether the trap is cleared. If the alarm persists, go to step 2.
2. Collect alarm information, log information and configuration information, and then contact technical support personnel.
3. End.