DEVM_1.3.6.1.4.1.2011.5.25.41.4.42 hwIfMonitorTxPauseFrameRising

Trap Buffer Description

The threshold crossing alert of TX PAUSE appears. (hwIfMonitorIndex=[hwIfMonitorIndex], hwIfMonitorTxPauseFrameStatistics=[hwIfMonitorTxPauseFrameStatistics], hwIfMonitorTxPauseFrameHighThreshold=[hwIfMonitorTxPauseFrameHighThreshold], hwIfMonitorTxPauseFrameLowThreshold=[hwIfMonitorTxPauseFrameLowThreshold], hwIfMonitorTxPauseFrameInterval=[hwIfMonitorTxPauseFrameInterval], hwIfMonitorName=[hwIfMonitorName])

An alarm appears when the number of TX PAUSE frames reaches the alarm threshold within a specified period.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwIfMonitorTxPauseFrameRising
Trap OID	1.3.6.1.4.1.2011.5.25.41.4.42
MIB	HUAWEI-IF-EXT-MIB
Alarm ID	0x00F100a1
Alarm Name	hwIfMonitorTxPauseFrameRising
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.41.4.43 hwIfMonitorTxPauseFrameRisingResume

Trap Buffer Parameters

Parameter	Description
hwIfMonitorIndex	Index of physical port.
hwIfMonitorTxPauseFrameStatistics	Statistics about TX pause frames.
hwIfMonitorTxPauseFrameHighThreshold	Upper alarm threshold of TX pause frames.
hwIfMonitorTxPauseFrameLowThreshold	Lower alarm threshold of TX pause frames.
hwIfMonitorTxPauseFrameInterval	Detection interval of TX pause frame alarms.
hwIfMonitorName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.41.1.7.1.1.43	hwIfMonitorTxPauseFrameStatistics	hwIfMonitorIndex
1.3.6.1.4.1.2011.5.25.41.1.7.1.1.44	hwIfMonitorTxPauseFrameHighThreshold	hwIfMonitorIndex
1.3.6.1.4.1.2011.5.25.41.1.7.1.1.45	hwIfMonitorTxPauseFrameLowThreshold	hwIfMonitorIndex
1.3.6.1.4.1.2011.5.25.41.1.7.1.1.46	hwIfMonitorTxPauseFrameInterval	hwIfMonitorIndex
1.3.6.1.4.1.2011.5.25.41.1.7.1.1.19	hwIfMonitorName	hwIfMonitorIndex

Impact on the System

Certain service data is lost on the interface.

Possible Causes

The number of TX PAUSE frames reaches the alarm threshold within a specified period.

Procedure

1.Reduce the traffic transmitted by the remote interface, and then check whether the alarm disappears.

If so, go to End.
If not, go to Step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.