DISASTER_RECOVERY_1.3.6.1.4.1.2011.5.25.345.2.11.1 hwCuCpRoleConflict

Trap Buffer Description

The disaster recovery roles of two CPs conflict.(hwSourceIpAddress=[hwSourceIpAddress],hwPeerIpAddress=[hwPeerIpAddress])

The disaster recovery roles of two CPs conflicted.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwCuCpRoleConflict
Trap OID	1.3.6.1.4.1.2011.5.25.345.2.11.1
MIB	HUAWEI-VNE-MIB
Alarm ID	0x00F102aa
Alarm Name	hwCuCpRoleConflict
Alarm Type	processingErrorAlarm
Raise or Clear	Raise
Match trap	DISASTER_RECOVERY_1.3.6.1.4.1.2011.5.25.345.2.11.2 hwCuCpRoleConflictResume

Trap Buffer Parameters

Parameter	Description
hwSourceIpAddress	IP address of the peer controller of CP1's CUSP channel
hwPeerIpAddress	IP address of the peer controller of CP2's CUSP channel

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.345.1.22	hwSourceIpAddress	-
1.3.6.1.4.1.2011.5.25.345.1.23	hwPeerIpAddress	-

Impact on the System

The remote disaster recovery function is unavailable.

Possible Causes

The roles configured for the two CPs conflicted and they had the same priority.

Procedure

1.Check whether the master/backup roles configured for the disaster recovery groups on the two CPs conflict. If they conflict, run the set preferred-role { master | slave } command in the disaster recovery group view to configure different master/backup roles for the two CPs.

If the trap is cleared, go to Step 3.
If the trap persists, go to Step 2.

2.Collect trap, log, and configuration information, and contact technical support personnel.

3.End.