DRIVER_1.3.6.1.4.1.2011.5.25.157.2.268 hwFlexEPhyFcsSdAlarm

Trap Buffer Description

The FCS-SD error is rising.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

The FCS-SD error is rising.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwFlexEPhyFcsSdAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.268
MIB	HUAWEI-PORT-MIB
Alarm ID	0x00F10224
Alarm Name	hwFlexEPhyFcsSdAlarm
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DRIVER_1.3.6.1.4.1.2011.5.25.157.2.269 hwFlexEPhyFcsSdAlarmResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1	hwPhysicalPortIfIndex	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

These errors cause packet loss, affecting services.

Possible Causes

The FlexE physical interface receives fcs-sd data.

Procedure

1. Check whether the optical fiber is properly connected. The optical fiber has card fasteners. If you hear a click sound, the optical fiber is properly connected. Then, run the display this interface command to check whether the interface is Up.

If so, go to Step 2.
If not, go to Step 3.

2. Run the display this interface command in the interface view to check whether the receive optical power of the optical module is in the normal range.

If so, go to Step 3.
If not, go to Step 3.

3. Collect alarm information, log information and configuration information, and then contact technical support personnel.

4. End.