EOAM-Y1731_1.3.6.1.4.1.2011.5.25.136.1.6.52 hwY1731Statistic

Trap Buffer Description

The Y.1731 statistic value exceeded the upper limit value. (MdIndex=[MdIndex], MaIndex=[MaIndex], MepID=[MepID], Type=[Type], MAC=[MAC], Priority=[Priority], MdName=[MdName], MaName=[MaName], Value=[Value], UpperLimitThreshold=[UpperLimitThreshold], LowerLimitThreshold=[LowerLimitThreshold], ValueHigh=[ValueHigh], ValueLow=[ValueLow])

The Y.1731 performance statistic value exceeded the upper alarm threshold.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	STATISTIC
Trap OID	1.3.6.1.4.1.2011.5.25.136.1.6.52
MIB	HUAWEI-ETHOAM-MIB
Alarm ID	0x09ac2016
Alarm Name	STATISTIC
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	EOAM-Y1731_1.3.6.1.4.1.2011.5.25.136.1.6.53 hwY1731StatisticClear

Trap Buffer Parameters

Parameter	Description
MdIndex	Index of an MD table
MaIndex	Index of an MA table
MepID	MEG ID
Type	Alarm type
MAC	MAC address
Priority	Priority of performance measurement
MdName	Name of an MD
MaName	Name of an MA
Value	Statistic value
UpperLimitThreshold	Upper threshold
LowerLimitThreshold	Lower threshold
ValueHigh	32 most significant bits
ValueLow	32 least significant bits

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.3	hwDot1agCfmMdName	hwDot1agCfmMdIndex
1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.2	hwDot1agCfmMaName	hwDot1agCfmMdIndex hwDot1agCfmMaIndex
1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.1	hwDot1agCfmMepIdentifier	hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier
1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.4	hwY1731StatisticTrapLogValue	hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier hwY1731StatisticTrapLogType hwY1731StatisticTrapLogMacAddress hwY1731StatisticTrapLog8021pPriority
1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.5	hwY1731StatisticTrapLogUpperLimitThreshold	hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier hwY1731StatisticTrapLogType hwY1731StatisticTrapLogMacAddress hwY1731StatisticTrapLog8021pPriority
1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.6	hwY1731StatisticTrapLogLowerLimitThreshold	hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier hwY1731StatisticTrapLogType hwY1731StatisticTrapLogMacAddress hwY1731StatisticTrapLog8021pPriority
1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.7	hwY1731StatisticTrapLogValueHigh	hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier hwY1731StatisticTrapLogType hwY1731StatisticTrapLogMacAddress hwY1731StatisticTrapLog8021pPriority
1.3.6.1.4.1.2011.5.25.136.1.8.2.7.1.8	hwY1731StatisticTrapLogValueLow	hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier hwY1731StatisticTrapLogType hwY1731StatisticTrapLogMacAddress hwY1731StatisticTrapLog8021pPriority

Procedure

1. Rectify the fault based on the Type field value in the alarm information.

If the Type field is 0, the alarm is a one-way frame delay alarm. Go to 2.
If the Type field is 1, the alarm is a two-way frame delay alarm. Go to 3.
If the Type field is 2, the alarm is a one-way frame jitter alarm. Go to 4.
If the Type field is 3, the alarm is a two-way frame jitter alarm. Go to 5.
If the Type field is 4, the alarm is an alarm for the near-end frame loss rate of single-ended frame loss. Go to 6.
If the Type field is 5, the alarm is an alarm for the far-end frame loss rate of single-ended frame loss. Go to 7.
If the Type field is 6, the alarm is an alarm for the near-end frame loss rate of dual-ended frame loss. Go to 8.
If the Type field is 7, the alarm is an alarm for the far-end frame loss rate of dual-ended frame loss. Go to 9.

2. Run the display y1731 threshold-info onedelay-threshold md md-name ma ma-name mep-id mep-id [ 8021p 8021p-value ] command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for one-way frame delay is too small.

If yes, run the delay-measure one-way delay-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit [ 8021p 8021p-value ] command to reset the upper threshold. Go to 10.
If no, go to 11.

3. Run the display y1731 threshold-info twodelay-threshold md md-name ma ma-name mep-id mep-id [ 8021p 8021p-value ] command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for two-way frame delay is too small.

If yes, run the delay-measure two-way delay-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit [ 8021p 8021p-value ] command to reset the upper threshold. Go to 10.
If no, go to 11.

4. Run the display y1731 threshold-info onedelay-variation md md-name ma ma-name mep-id mep-id [ 8021p 8021p-value ] command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for one-way frame jitter is too small.

If yes, delay-measure one-way variation-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit [ 8021p 8021p-value ] command to reset the upper threshold. Go to 10.
If no, go to 11.

5. Run the display y1731 threshold-info twodelay-variation md md-name ma ma-name mep-id mep-id [ 8021p 8021p-value ] command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for two-way frame jitter is too small.

If yes, run the delay-measure two-way variation-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit [ 8021p 8021p-value ] command to reset the upper threshold. Go to 10.
If no, go to 11.

6. Run the display y1731 threshold-info singleloss-localratio md md-name ma ma-name mep-id mep-id [ 8021p 8021p-value ] command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for the near-end frame loss rate of single-ended frame loss is too small.

If yes, run the loss-measure single-ended local-ratio-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit [ 8021p 8021p-value ] command to reset the upper threshold. Go to 10.
If no, go to 11.

7. Run the display y1731 threshold-info singleloss-remoteratio md md-name ma ma-name mep-id mep-id [ 8021p 8021p-value ] command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for the far-end frame loss rate of single-ended frame loss is too small.

If yes, run the loss-measure single-ended remote-ratio-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit [ 8021p 8021p-value ] command to reset the upper threshold. Go to 10.
If no, go to 11.

8. Run the display y1731 threshold-info dualloss-localratio md md-name ma ma-name mep-id mep-id command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for the near-end frame loss rate of dual-ended frame loss is too small.

If yes, run the loss-measure dual-ended local-ratio-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit command to reset the upper threshold. Go to 10.
If no, go to 11.

9. Run the display y1731 threshold-info dualloss-localratio md md-name ma ma-name mep-id mep-id command to view the values of UpperLimit and LowerLimit fields. Based on these values, determine whether the upper threshold for the far-end frame loss rate of dual-ended frame loss is too small.

If yes, run the loss-measure dual-ended local-ratio-threshold mep mep-id upper-limit upper-limit lower-limit lower-limit command to reset the upper threshold. Go to 10.
If no, go to 11.

10. In the system view, run the display alarm active command to check whether the alarm is cleared. If no, go to 11.

11. Collect alarm information and configuration information, and then contact technical support personnel.

12. End.