The total bandwidth of the channelized sub-interfaces on the same physical or Eth-Trunk interface has exceeded the maximum available bandwidth of the physical or Eth-Trunk interface. (Interface=[IfIndex], Bandwidth=[Bandwidth], SubIfBandwidthSum=[SubIfBandwidthSum], InterfaceName=[InterfaceName])
The total bandwidth of the channelized sub-interfaces on the same physical or Eth-Trunk interface has exceeded the maximum available bandwidth of the physical or Eth-Trunk interface.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwModeChannelBandwidthAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.41.4.60 |
MIB |
HUAWEI-IF-EXT-MIB |
Alarm ID |
0x00F102af |
Alarm Name |
hwModeChannelBandwidthAlarm |
Alarm Type |
processingErrorAlarm |
Raise or Clear |
Raise |
Match trap |
FEI_L2_1.3.6.1.4.1.2011.5.25.41.4.61 hwModeChannelBandwidthResume |
| Parameter | Description |
|---|---|
IfIndex |
Interface index |
Bandwidth |
available bandwidth of the physical or Eth-Trunk interface |
SubIfBandwidthSum |
The total bandwidth of the channelized sub-interfaces |
InterfaceName |
Interface name |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.41.1.25.1.1.1 |
hwModeChannelBandwidthIfIndex |
hwModeChannelBandwidthIfIndex |
1.3.6.1.4.1.2011.5.25.41.1.25.1.1.2 |
hwModeChannelBandwidthValue |
hwModeChannelBandwidthIfIndex |
1.3.6.1.4.1.2011.5.25.41.1.25.1.1.3 |
hwModeChannelSubIfBandwidthSum |
hwModeChannelBandwidthIfIndex |
1.3.6.1.4.1.2011.5.25.41.1.25.1.1.4 |
hwModeChannelIfName |
hwModeChannelBandwidthIfIndex |
1. Run the mode channel bandwidth command in the sub-interface view to set the bandwidth of the channelized sub-interface to a smaller value. Then check whether the alarm is cleared.
2. Collect the trap information, log information, and configuration information, and then contact technical support personnel.
3. End.