FEI_L2_1.3.6.1.4.1.2011.5.25.42.2.1.7.50 hwServiceNotSupportSrteLoadBanlance

Trap Buffer Description

The service can not support ecmp SR-MPLS TE tunnel load banlance and SR-MPLS TE tilfa fast switch.(TunnelName=[TunnelName], ServiceName=[ServiceName]).

Traffic for the service could not be balanced over SR-MPLS TE tunnels, and could not be switched fastly over SR-MPLS TE TILFA tunnels.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	ServiceNotSupportNodeSrteLoadBanlanceEvent
Trap OID	1.3.6.1.4.1.2011.5.25.42.2.1.7.50
MIB	HUAWEI-L2MAM-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
TunnelName	Tunnel name.
ServiceName	Service name.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.42.2.1.51.1.1	hwNodeSrteTunnelName	hwNodeSrteTunnelName hwNodeSrteServiceName
1.3.6.1.4.1.2011.5.25.42.2.1.51.1.2	hwNodeSrteServiceName	hwNodeSrteTunnelName hwNodeSrteServiceName

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.42.2.1.51.1.1

hwNodeSrteTunnelName

hwNodeSrteServiceName

1.3.6.1.4.1.2011.5.25.42.2.1.51.1.2

hwNodeSrteServiceName

hwNodeSrteTunnelName

hwNodeSrteServiceName

Impact on the System

Services are not affected.

Possible Causes

The device has tunnels of the SR-MPLS TE type. Traffic for the service could not be balanced over SR-MPLS TE tunnels or switched quickly over SR-MPLS TE TI-LFA tunnels.

Procedure

This trap message is informational only, and no action is required.