L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.53 hwPbbEvpnNotSupportTunnelAlarm
Trap Buffer Description
The public network tunnel of PBB EVPN cannot forward traffic. (EvpnName=[hwNotSupportTunnelEvpnName], RemoteIp=[hwEVPNPeerRemoteIp], TunnelType=[hwNotSupportTunnelType])
The public network tunnel of PBB EVPN cannot forward traffic.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwPbbEvpnNotSupportTunnelAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.42.2.1.7.53 |
MIB |
HUAWEI-L2MAM-MIB |
Alarm ID |
0x00F101e7 |
Alarm Name |
hwPbbEvpnNotSupportTunnelAlarm |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.54 hwPbbEvpnNotSupportTunnelAlarmResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
hwNotSupportTunnelEvpnName |
EVPN Name. |
hwEVPNPeerRemoteIp |
Remote IP. |
hwNotSupportTunnelType |
Tunnel Type. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.42.2.1.45.1.1 |
hwEVPNPeerRemoteIp |
hwEVPNPeerRemoteIp hwNotSupportTunnelEvpnName |
1.3.6.1.4.1.2011.5.25.42.2.1.45.1.2 |
hwNotSupportTunnelEvpnName |
hwEVPNPeerRemoteIp hwNotSupportTunnelEvpnName |
1.3.6.1.4.1.2011.5.25.42.2.1.47 |
hwNotSupportTunnelType |
- |
Possible Causes
- Cause 1: The PBB EVPN is carried over a BGP tunnel, and the signaling protocol status of the PBB EVPN is up.
- Cause 2: The PBB EVPN is carried over a E2E-SRTE tunnel, and the signaling protocol status of the PBB EVPN is up.
- Cause 3: The PBB EVPN is carried over a TE over GRE tunnel, and the signaling protocol status of the PBB EVPN is up.
Procedure
1.Run the tunnel-policy command in system view to specify an LDP or TE tunnel in a tunnel policy. Then check whether the alarm is cleared.
- If yes, go to Step 4.
- If no, go to Step 2.
2.Run the tnl-policy bevpn command in the B-EVPN instance view to bind the B-EVPN instance to the specified tunnel policy. Then check whether the alarm is cleared.
- If yes, go to Step 4.
- If no, go to Step 3.
3.Collect trap, log, and configuration information, and contact technical support personnel.
4.End.