L3VPN_1.3.6.1.4.1.2011.5.25.145.33.2 hwIpv4RouteExceedClear

Trap Buffer Description

The number of IPv4 routes in the VPN instance fell below the maximum number(Excluding maximum). (VPN instance name=[vpnName], number of existing routes=[current], maximum value=[max])

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwL3vpnIpv4RouteExceed
Trap OID	1.3.6.1.4.1.2011.5.25.145.33.2
MIB	HUAWEI-RM-EXT-MIB
Alarm ID	0x00F1021c
Alarm Name	hwL3vpnIpv4RouteExceed
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Clear
Match trap	L3VPN_1.3.6.1.4.1.2011.5.25.145.33.1 hwIpv4RouteExceed

Trap Buffer Parameters

Parameter	Description
vpnName	VPN instance name.
current	Current number of IPv4 routes in the VPN instance.
max	Maximum number of IPv4 routes in the VPN instance.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.145.31.3	hwIpv4RouteLimitVpnName	-
1.3.6.1.4.1.2011.5.25.145.31.1	hwCurIpv4RouteNum	-
1.3.6.1.4.1.2011.5.25.145.31.2	hwIpv4RouteLimitValue	-

Impact on the System

Services will not be affected.

Possible Causes

Cause 1: Routes were deleted by a specific protocol.

Cause 2: Configuration of the routing-table limit command was deleted or modified to increase the limit on the maximum number of routes so that the number of the VPN IPv4 routes was lower than the maximum value.

Procedure

Collect alarm information and configuration information, and then contact technical support personnel.