The peer address count reaches the upper limit. (PeerLsrId=[PeerLsrId],VrfName=[VrfName],AddressTotalCount=[AddressTotalCount])
When the number of address messages received by a single peer exceeds the upper limit, an alarm is generated, indicating that the number of addresses received by the system exceeds the upper limit. In this case, you need to limit the number of addresses to prevent services from being affected.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwMplsLdpPeerAddressCountExceed |
Trap OID |
1.3.6.1.4.1.2011.5.25.143.2.7 |
MIB |
HUAWEI-MPLSLDP-MIB |
Alarm ID |
0x00f10467 |
Alarm Name |
hwMplsLdpPeerAddressCountExceed |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
LDP_1.3.6.1.4.1.2011.5.25.143.2.8 hwMplsLdpPeerAddressCountExceedClear |
| Parameter | Description |
|---|---|
PeerLsrId |
LDP peer ID |
VrfName |
Index of the VRF to which the LDP peer belongs |
AddressTotalCount |
Number of addresses supported by the system |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.143.1.75.1.1 |
hwLdpPeerAddressLsrId |
hwLdpPeerAddressLsrId hwLdpPeerVrfIndex |
1.3.6.1.4.1.2011.5.25.143.1.75.1.2 |
hwLdpPeerVrfIndex |
hwLdpPeerAddressLsrId hwLdpPeerVrfIndex |
1.3.6.1.4.1.2011.5.25.143.1.75.1.3 |
hwLdpAddressTotalCount |
hwLdpPeerAddressLsrId hwLdpPeerVrfIndex |
1. You can modify the configuration to reduce unnecessary LDP-enabled interfaces on the peer interface to prevent services from being affected.
2. Collect alarm and configuration information, and contact technical support personnel.
3. End.