Tunnel status changes to Up. (TunnelId=[TunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], OutIfIndex=[OutIfIndex], TunnelAdminStatus=[TunnelAdminStatus], TunnelOperStatus=[TunnelOperStatus], TunnelName=[TunnelName], OutIfName=[OutIfName], SubReason=[SubReason], SignalledTunnelName=[SignalledTunnelName])
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
mplsTunnelDown |
Trap OID |
1.3.6.1.2.1.10.166.3.0.1 |
MIB |
MPLS-TE-STD-MIB |
Alarm ID |
0x0001004f |
Alarm Name |
mplsTunnelDown |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Clear |
Match trap |
| Parameter | Description |
|---|---|
TunnelId |
Indicates the ID of the tunnel. |
LocalLspId |
Indicates the LSP ID of a session. |
IngressLsrId |
Indicates the LSR ID of the ingress on the tunnel. |
EgressLsrId |
Indicates the LSR ID of the egress on the tunnel. |
OutIfIndex |
Indicates the outgoing interface index of the ingress of the LSP that goes Down. |
TunnelAdminStatus |
Indicates the management status of the tunnel. |
TunnelOperStatus |
Indicates the operating status of the tunnel. |
TunnelName |
Indicates the name of the tunnel. |
OutIfName |
Indicates the name of the outgoing interface on the ingress of the LSP that goes Down. |
SubReason |
Indicates the sub-cause for identifying the alarm clearance type. The default value is 0 when an alarm is generated. The meaning of a different sub-cause value is as follows:
|
SignalledTunnelName |
Tunnel alias. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.2.1.10.166.3.2.2.1.34 |
mplsTunnelAdminStatus |
mplsTunnelIndex mplsTunnelInstance mplsTunnelIngressLSRId mplsTunnelEgressLSRId |
1.3.6.1.2.1.10.166.3.2.2.1.35 |
mplsTunnelOperStatus |
mplsTunnelIndex mplsTunnelInstance mplsTunnelIngressLSRId mplsTunnelEgressLSRId |
1.3.6.1.2.1.10.166.3.2.2.1.5 |
mplsTunnelName |
mplsTunnelIndex mplsTunnelInstance mplsTunnelIngressLSRId mplsTunnelEgressLSRId |
1.3.6.1.2.1.31.1.1.1.1 |
ifName |
ifIndex |