Working or protection path mismatch are detected by APS frame. (IfIndex=[WorkTunnelIfIndex], SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId],WorkTunnel=[WorkTunnel], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])
The working or protection tunnels at both ends of an APS group are different.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
TUNNEL_APS_PATHMISMATCH |
Trap OID |
1.3.6.1.4.1.2011.5.12.7.1.4.13 |
MIB |
HUAWEI-MPLSOAM-MIB |
Alarm ID |
0x0001000d |
Alarm Name |
TUNNEL_APS_PATHMISMATCH |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
MPLS_LSPM_1.3.6.1.4.1.2011.5.12.7.1.4.14 hwMplsApsPathMisMatchRecovery |
| Parameter | Description |
|---|---|
SessionTunnelId |
Tunnel ID |
LocalLspId |
LSP ID |
IngressLsrId |
LSR ID of the ingress on an LSP |
EgressLsrId |
LSR ID of the egress on an LSP |
WorkTunnel |
Name of the working tunnel in a tunnel protection group |
SgnlPrtcl |
Signaling protocol used by a tunnel session:
|
LsrRole |
LSP role:
|
WorkTunnelIfIndex |
Index of a primary tunnel interface |
SignalledTunnelName |
Tunnel alias. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3 |
hwMplsPsWorkTunnName |
hwMplsPsIndex |
1.3.6.1.4.1.2011.5.12.7.1.3.4 |
hwMplsApsMismatchReason |
- |
1.3.6.1.4.1.2011.5.25.121.1.1.1.33 |
hwMplsTunnelSignalledTunnelName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
Cause 1: The working or protection tunnels at both ends of an APS group are different.
Check that the working or protection tunnels at both ends of an APS group are the same.
Cause 2: Physical links were incorrectly connected.
Check that the optical fiber or cable between the local and remote devices is correctly connected.