The RDI alarm received by the tunnel is cleared. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
hwMplsOamRdi |
Trap OID |
1.3.6.1.4.1.2011.5.25.121.2.1.23 |
MIB |
HUAWEI-MPLS-EXTEND-MIB |
Alarm ID |
0x0001005a |
Alarm Name |
hwMplsOamRdi |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Clear |
Match trap |
| Parameter | Description |
|---|---|
SessionTunnelId |
Tunnel ID |
LocalLspId |
Local LSP ID |
IngressLsrId |
ID of the ingress LSR |
EgressLsrId |
ID of the egress LSR |
TunnelName |
Tunnel name |
SgnlPrtcl |
Tunneling protocol Ranges:
|
LsrRole |
Lsp Lsr Role. |
SignalledTunnelName |
Tunnel alias. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.121.1.1.1.29 |
hwMplsTunnelInterfaceName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1.3.6.1.4.1.2011.5.25.121.1.1.1.30 |
hwMplsTunnelSignalProto |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1.3.6.1.4.1.2011.5.25.121.1.1.1.33 |
hwMplsTunnelSignalledTunnelName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1. Contact engineers of the peer end to check whether a CC alarm is cleared on the peer end.
2. This alarm is informational only, and no action is required. Then go to Step 4.
3. Collect alarm information and configuration information, and then contact technical support personnel.
4. End.