The tunnel receives an SD2 alarm.(SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])
The packet loss ratio of an MPLS tunnel on the local end reached the SD2 threshold.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwMplsOamSF |
Trap OID |
1.3.6.1.4.1.2011.5.25.121.2.1.28 |
MIB |
HUAWEI-MPLS-EXTEND-MIB |
Alarm ID |
0x0001005c |
Alarm Name |
hwMplsOamSF |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.29 hwMplsOamSFRecovery |
| Parameter | Description |
|---|---|
SessionTunnelId |
Tunnel ID |
LocalLspId |
Local LSP ID |
IngressLsrId |
ID of the ingress LSR |
EgressLsrId |
ID of the egress LSR |
TunnelName |
Tunnel name |
SgnlPrtcl |
Tunneling protocol |
SignalledTunnelName |
Tunnel alias. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.121.1.1.1.29 |
hwMplsTunnelInterfaceName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1.3.6.1.4.1.2011.5.25.121.1.1.1.30 |
hwMplsTunnelSignalProto |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1.3.6.1.4.1.2011.5.25.121.1.1.1.33 |
hwMplsTunnelSignalledTunnelName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1. Check whether the threshold is set properly.
2. Reconfigure the threshold.
Check whether the MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.29 hwMplsOamSFRecovery alarm is generated.
3. Collect alarm and configuration information, and contact technical support personnel. 4. End.