The lsp count reaches the upper limit.(hwMplsLspProtocol=[LspProtocol], hwMplsLspTotalCount=[LspTotalCount])
The lsp count reaches the max number.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwMplsLspTotalCountExceed |
Trap OID |
1.3.6.1.4.1.2011.5.25.121.2.1.65 |
MIB |
HUAWEI-MPLS-EXTEND-MIB |
Alarm ID |
0x00F1003e |
Alarm Name |
hwMplsLspTotalCountExceed |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.66 hwMplsLspTotalCountExceedClear |
| Parameter | Description |
|---|---|
LspProtocol |
LSP protocol type |
LspTotalCount |
Upper limit of supported LSPs |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.121.2.2.4 |
hwMplsLspProtocol |
- |
1.3.6.1.4.1.2011.5.25.121.2.2.6 |
hwMplsLspTotalCount |
- |
There are some methods to limit to create LSP:
(1)configure lsp-trigger to control.
(2)configure mpls ldp outbound/inbound.
(3)configure mpls ldp propagate mapping.