MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.69 hwMplsDynamicLabelTotalCountExceed

Trap Buffer Description

The dynamic label count reaches the upper limit. (hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount])

Dynamic label usage reached 100%.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwMplsDynamicLabelTotalCountExceed
Trap OID	1.3.6.1.4.1.2011.5.25.121.2.1.69
MIB	HUAWEI-MPLS-EXTEND-MIB
Alarm ID	0x00F10033
Alarm Name	hwMplsDynamicLabelTotalCountExceed
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear

Trap Buffer Parameters

Parameter	Description
DynamicLabelTotalCount	Indicates the maximum number of dynamic labels supported by the device.
DynamicLabelCurrentCount	Indicates the number of dynamic labels that are currently used on the device.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.121.3.3	hwMplsDynamicLabelTotalCount	-
1.3.6.1.4.1.2011.5.25.121.3.4	hwMplsDynamicLabelCurrentCount	-

Impact on the System

All dynamic labels are used, and no subsequent LSPs can be established.

Possible Causes

A great number of LSPs were established, and all dynamic labels were used.

Procedure

1. Run the display mpls lsp statistics command to view statistics about LSPs. Re-plan the services and delete unwanted LSPs that use dynamic labels. Then check whether MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear is generated.

If this clear alarm is generated, go to step 3.
If this clear alarm is not generated, go to step 2.

2. Collect alarm information and configuration information, and then contact technical support personnel.

3. End.