MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.76 hwMplsLspLoopBackClear

Trap Buffer Description

Loopback of LSP was recovery. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], LSPName=[LSPName])

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	MPLS_LSP_LOOPBACK
Trap OID	1.3.6.1.4.1.2011.5.25.121.2.1.76
MIB	HUAWEI-MPLS-EXTEND-MIB
Alarm ID	0x000000F0
Alarm Name	hwMplsLspLoopBack
Alarm Type	communicationsAlarm
Raise or Clear	Clear
Match trap	MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.75 hwMplsLspLoopBack

Trap Buffer Parameters

Parameter	Description
SessionTunnelId	Tunnel ID
LocalLspId	Local LSP ID
IngressLsrId	Ingress LSR ID
EgressLsrId	Egress LSR ID
LSPName	The name of LSP

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.121.2.2.15	hwMplsSessionTunnelId	-
1.3.6.1.4.1.2011.5.25.121.2.2.16	hwMplsLocalLspId	-
1.3.6.1.4.1.2011.5.25.121.2.2.17	hwMplsIngressLsrId	-
1.3.6.1.4.1.2011.5.25.121.2.2.18	hwMplsEgressLsrId	-
1.3.6.1.4.1.2011.5.25.121.2.2.19	hwMplsLspName	-

Impact on the System

Services are not affected.

Possible Causes

Loopback detection was disabled for a specified static bidirectional co-routed CR-LSP.

Procedure

1. This trap message is informational only, and no action is required.