MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.94 hwBlockLabelTotalCountExceed

Trap Buffer Description

The block label count reaches the upper limit.(hwBlockLabelTotalCount=[BlockLabelTotalCount], hwBlockLabelCurrentCount=[BlockLabelCurrentCount])

Block label usage reached 100%.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwBlockLabelTotalCountExceed
Trap OID	1.3.6.1.4.1.2011.5.25.121.2.1.94
MIB	HUAWEI-MPLS-EXTEND-MIB
Alarm ID	0x00F1033b
Alarm Name	hwBlockLabelTotalCountExceed
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.95 hwBlockLabelTotalCountExceedClear

Trap Buffer Parameters

Parameter	Description
BlockLabelTotalCount	Indicates the maximum number of block labels supported by the device.
BlockLabelCurrentCount	Indicates the number of block labels that are currently used on the device.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.121.3.7	hwBlockLabelTotalCount	-
1.3.6.1.4.1.2011.5.25.121.3.8	hwBlockLabelCurrentCount	-

Impact on the System

All the block labels are used, and no subsequent BGP VPLS or BGP VLL services can be established.

Possible Causes

The device had an excessive number of BGP VPLS or BGP VLL services configured, causing the block label usage to reach 100%.

Procedure

1. Delete some BGP VPLS or BGP VLL services. Then check whether the alarm MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.95 hwBlockLabelTotalCountExceedClear is generated.

If the alarm is generated, go to step 3.

If the alarm is not generated, go to step 2.

2. Collect the trap and configuration information, and contact technical support.

3. End.