MPLS_LSPM_1.3.6.1.4.1.2011.5.25.165.2.2.10.1 hwTeSourceInterfaceCheckAlarm

The packets are discarded because they do not match the TE source interface.(TeLabel=[hwRpfTeLabel], PortName=[hwRpfPortName])

Packets with a mismatching TE source interface name were discarded.

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwTeSourceInterfaceCheckAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.165.2.2.10.1
MIB	HUAWEI-SECURITY-MIB
Alarm ID	0x00F100a4
Alarm Name	hwTeSourceInterfaceCheckAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	MPLS_LSPM_1.3.6.1.4.1.2011.5.25.165.2.2.10.2 hwTeSourceInterfaceCheckResume

Parameter	Description
hwRpfTeLabel	Static LSP label value
hwRpfPortName	Interface name

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.1	hwRpfTeLabel	hwRpfTeLabel hwRpfPortName
1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.2	hwRpfPortName	hwRpfTeLabel hwRpfPortName

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.1

hwRpfTeLabel

hwRpfPortName

1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.2

hwRpfPortName

hwRpfTeLabel

hwRpfPortName

Impact on the System

Packets are discarded, and the forwarding fails.

The inbound interface name carried in packets of the static TE tunnel did not match the configured inbound interface name.

1. Run the display mpls te tunnel verbose command to check whether the outbound interface name configured on the upstream node is correct.

If the configuration is correct, go to Step 2.
If the configuration is incorrect, correct the configuration. Then, check whether the alarm is cleared.If the alarm is cleared, go to Step 3,else go to Step 2.

2. Collect trap, log, and configuration information, and contact technical support personnel.

3. End.