MPLS_LSPM_1.3.6.1.4.1.2011.5.25.165.2.2.10.2 hwTeSourceInterfaceCheckResume

Trap Buffer Description

No mismatch packets are found during the TE source interface check.(TeLabel=[hwRpfTeLabel], PortName=[hwRpfPortName])

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwTeSourceInterfaceCheckAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.165.2.2.10.2
MIB	HUAWEI-SECURITY-MIB
Alarm ID	0x00F100a4
Alarm Name	hwTeSourceInterfaceCheckAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Clear
Match trap	MPLS_LSPM_1.3.6.1.4.1.2011.5.25.165.2.2.10.1 hwTeSourceInterfaceCheckAlarm

Trap Buffer Parameters

Parameter	Description
hwRpfTeLabel	Static LSP label value
hwRpfPortName	Interface name

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.1	hwRpfTeLabel	hwRpfTeLabel hwRpfPortName
1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.2	hwRpfPortName	hwRpfTeLabel hwRpfPortName

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.1

hwRpfTeLabel

hwRpfPortName

1.3.6.1.4.1.2011.5.25.165.2.1.10.1.1.2

hwRpfPortName

hwRpfTeLabel

hwRpfPortName

Impact on the System

Services will not be affected.

Possible Causes

The incoming interface of the packet match the CR-LSP incoming interface.

Procedure

1. The alarm will clear 30 minutes later.

2. Run the corresponding command to clear the alarm. (After the alarm is cleared using the command, if the trigger condition is met, the command is not reported immediately, but reported after the suppression period expires.)