MSTP_1.3.6.1.4.1.2011.5.25.42.4.2.23 hwMstpProNewPortLoopGuarded

Trap Buffer Description

The loop protection port in the instance of the MSTP process did not receive BPDU packets within prescriptive time. (ProcessID=[ProcessID], InstanceID=[InstanceID], PortID1=[PortID1], PortID2=[PortID2], PortID3=[PortID3], PortID4=[PortID4], PortIDFlag=[PortIDFlag], PortState=[PortState], IfIndex=[IfIndex], PortName=[PortName], PwName=[PwName])

Specify that the root port has not received any BPDU packets for a long time when loop protection is enabled

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	PROPORT_LOOP_GUARDED
Trap OID	1.3.6.1.4.1.2011.5.25.42.4.2.23
MIB	HUAWEI-MSTP-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
ProcessID	Indicates the MSTP process ID.
InstanceID	Indicates the instance ID.
PortID1	Indicates ID 1 of the port in the MSTP process.
PortID2	Indicates ID 2 of the port in the MSTP process.
PortID3	Indicates ID 3 of the port in the MSTP process.
PortID4	Indicates ID 4 of the port in the MSTP process.
PortIDFlag	Indicates the port flag.
PortState	Indicates the port state.
IfIndex	Indicates the interface index.
PortName	Indicates the port name.
PwName	Indicates the PW name.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1	hwMstpProNewPortState	hwMstpProID hwMstpInstanceID hwMstpPortId1 hwMstpPortId2 hwMstpPortId3 hwMstpPortId4 hwMstpPortIdFlag
1.3.6.1.2.1.31.1.1.1.1	ifName	ifIndex
1.3.6.1.4.1.2011.5.25.42.4.1.33	hwMstpPwName	-

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1

hwMstpProNewPortState

hwMstpProID

hwMstpInstanceID

hwMstpPortId1

hwMstpPortId2

hwMstpPortId3

hwMstpPortId4

hwMstpPortIdFlag

1.3.6.1.2.1.31.1.1.1.1

ifName

ifIndex

1.3.6.1.4.1.2011.5.25.42.4.1.33

hwMstpPwName

Impact on the System

The interface will not forward data.

Possible Causes

Cause 1: The spanning tree function was disabled on the peer device. Cause 2: The links connected to the peer were congested.

Procedure

Cause 1: The spanning tree function was disabled on the peer device.

1. Run the display stp command to check whether STP is disabled on the interfaces that are directly connected.

If STP is disabled on the interfaces that are directly connected, go to Step 2.
If STP is enabled on the interfaces that are directly connected, go to Step 3.

2. Run the stp enable command in the interface view to enable STP. Then, check whether the alarm is cleared. If the alarm persists, go to Step 3.

3. Collect alarm information and configuration information, and then contact technical support personnel.

Cause 2: The links connected to the peer were congested.

1. Check whether the link is congested between the local device and the neighbor device.

If the link is congested, go to Step 2.
If the link is not congested, go to Step 3.

2. Repair the physical link and then check whether the alarm is cleared. If the alarm persists, go to Step 3.

3. Collect alarm information and configuration information, and then contact technical support personnel.