NTP_1.3.6.1.4.1.2011.6.80.2.5 hwNtpDynamicSessionLimitReach

Trap Buffer Description

NTP dynamic session number reached the limit.(LimitNumber=[LimitNumber])

NTP dynamic session number reached the limit.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute Description

Alarm or Event

Alarm

Trap Severity

 Warning

Mnemonic Code

NTP_DYNAMIC_SESSION_LIMIT_REACH

Trap OID

1.3.6.1.4.1.2011.6.80.2.5

MIB

HUAWEI-NTP-TRAP-MIB

Alarm ID

0x00f1039a

Alarm Name

 hwNtpDynamicSessionLimitReach

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

NTP_1.3.6.1.4.1.2011.6.80.2.6 hwNtpDynamicSessionLimitReachResume

Trap Buffer Parameters

Parameter Description

LimitNumber

Limit number of dynamic sessions

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.6.80.1.7

hwNtpMaxDynamicSessions

-

Impact on the System

New dynamic sessions fail to be created

Possible Causes

  • Cause 1: The configured maximum number of dynamic sessions exceeds the lower limit.
  • Cause 2: The number of connections that have not been authenticated exceeds a specified threshold.

Procedure

  • Cause 1: The configured maximum number of dynamic sessions exceeds the lower limit.

    Set the maximum number of dynamic sessions to a proper value.

  • Cause 2: The number of connections that have not been authenticated exceeds a specified threshold.

    Configure the NTP authentication function.

Parent Topic: NTP
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >