NTP_1.3.6.1.4.1.2011.6.80.2.9 hwNtpSynchronizationFailure

NTP synchronization state changed.(State = [state], SynchronizationSourceAddress = [source])

1. The NTP server is incorrectly configured. 2. The NTP server cannot be connected or is disconnected abnormally. 3. The NTP server breaks down.

In VS mode, this trap is supported only by the admin VS.

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	NTP_SYNC_FAIL
Trap OID	1.3.6.1.4.1.2011.6.80.2.9
MIB	HUAWEI-NTP-TRAP-MIB
Alarm ID	0x00F1001d
Alarm Name	hwNtpSynchronizationFailure
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	NTP_1.3.6.1.4.1.2011.6.80.2.10 hwNtpSynchronizationFailureResume

Parameter	Description
state	NTP clock synchronization status
source	NTP clock synchronization source

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.80.1.1	hwNtpState	-
1.3.6.1.4.1.2011.6.80.1.2	hwNtpSource	-

Impact on the System

The clock status changes to unsynchronized.

Cause 1: Peer become unreachable.
Check whether the peer end is reachable.
Cause 2: Peer was deleated by configuration.
Check the configuration.
Cause 3: Peer went to unsynch state
Check the reason why the peer clock cannot be synchronized.
Cause 4: Peer source is unslectable
The offset, delay, and precision of the peer clock are not within the acceptable range.