OSPF_1.3.6.1.2.1.14.16.2.5 ospfVirtIfConfigError

Trap Buffer Description

A packet is received on the virtual interface from a router whose configuration conflicts with the local configuration. (VirtIfAreaId=[VirtIfAreaId], VirtIfNeighbor=[VirtIfNeighbor], ProcessId=[ProcessId], RouterId=[RouterId], ConfigErrorType=[ConfigErrorType], PacketType=[PacketType], InstanceName=[InstanceName])

A packet is received on the virtual interface from a router whose configuration conflicts with the local configuration.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	TRAP_VIF_CFG_ERR
Trap OID	1.3.6.1.2.1.14.16.2.5
MIB	OSPF-TRAP-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
VirtIfAreaId	Indicates the ID of a transit area.
VirtIfNeighbor	Indicates the IP address of a neighbor.
ProcessId	Indicates the ID of an OSPF process.
RouterId	Indicates the ID of a router.
ConfigErrorType	Indicates the error type.
PacketType	Indicates the packet type.
InstanceName	Indicates the VPN name.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.2.1.14.1.1	ospfRouterId	-
1.3.6.1.2.1.14.9.1.1	ospfVirtIfAreaId	ospfVirtIfAreaId ospfVirtIfNeighbor
1.3.6.1.2.1.14.9.1.2	ospfVirtIfNeighbor	ospfVirtIfAreaId ospfVirtIfNeighbor
1.3.6.1.2.1.14.16.1.2	ospfConfigErrorType	-
1.3.6.1.2.1.14.16.1.3	ospfPacketType	-

Impact on the System

This trap message is generated after the virtual interface receives a packet indicating parameters are incorrectly configured.

Possible Causes

The virtual interface is incorrectly configured.

Procedure

1. Run the display ospf vlink command to check the authentication configuration of the virtual interface.

2. Contact contact technical support personnel.