OSPF_1.3.6.1.2.1.14.16.2.9 ospfVirtIfRxBadPacket

Trap Buffer Description

An OSPF packet that is received on a virtual interface cannot be parsed. (VirtIfAreaId=[VirtIfAreaId], VirtIfNeighbor=[VirtIfNeighbor], ProcessId=[ProcessId], RouterId=[RouterId], PacketType=[PacketType], InstanceName=[InstanceName])

An error packet was received on the virtual interface.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Error
Mnemonic Code	TRAP_VIF_RX_BAD
Trap OID	1.3.6.1.2.1.14.16.2.9
MIB	OSPF-TRAP-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
VirtIfAreaId	Indicates the ID of a transit area.
VirtIfNeighbor	Indicates the IP address of a neighbor.
ProcessId	Indicates the ID of an OSPF process.
RouterId	Indicates the ID of a router.
PacketType	Indicates the packet type.
InstanceName	Indicates the VPN name.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.2.1.14.1.1	ospfRouterId	-
1.3.6.1.2.1.14.9.1.1	ospfVirtIfAreaId	ospfVirtIfAreaId ospfVirtIfNeighbor
1.3.6.1.2.1.14.9.1.2	ospfVirtIfNeighbor	ospfVirtIfAreaId ospfVirtIfNeighbor
1.3.6.1.2.1.14.16.1.3	ospfPacketType	-

Impact on the System

This trap message is generated when a virtual-link interface receives a packet that cannot be parsed and then discards this packet. This may cause the neighbor to be Down.

Possible Causes

An error packet was received on the virtual interface.

Procedure

1. Run the display ospf error packet command to check the error message.

2. Contact contact technical support personnel.