Router IDs conflict in an intra area. (ProcessId=[ProcessId], AreaId=[AreaId], SelfIfnetIndex=[SelfIfnetIndex], NbrIpAddr=[NbrIpAddr], RouterId=[RouterId], NbrRtrId=[NbrRtrId])
A router ID conflict was detected in an OSPF area.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
CONFLICT_ROUTERID_INTRA |
Trap OID |
1.3.6.1.4.1.2011.5.25.155.31.3 |
MIB |
HUAWEI-OSPFV2-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
ProcessId |
Indicates the ID of a process. |
AreaId |
Indicates the ID of an area. |
SelfIfnetIndex |
Indicates interface index. |
NbrIpAddr |
Indicates IP address of neighbor. |
RouterId |
Indicates the router ID of a router. |
NbrRtrId |
ID of a neighboring device. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.155.6.1.3 |
hwOspfv2SelfRouterId |
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2SelfIfnetIndex hwOspfv2NbrIpAddrIndex |
1.3.6.1.4.1.2011.5.25.155.6.1.9 |
hwOspfv2NbrRouterId |
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2SelfIfnetIndex hwOspfv2NbrIpAddrIndex |
1. Run the ospf router-id router-id command to change the router ID.
2. End.