The time offset of the passive port is normal. (hwPtpPortName=[hwPtpPortName], hwPtpPortIfIndex=[hwPtpPortIfIndex], hwPtpPortRingFiberLengthChangeValue=[hwPtpPortRingFiberLengthChangeValue], hwPtpPortRingFiberLengthChangeValueFlag=[hwPtpPortRingFiberLengthChangeValueFlag], hwPtpPassiveAlarmThreshold=[hwPtpPassiveAlarmThreshold])
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwPtpPassiveMeasureOverflow |
Trap OID |
1.3.6.1.4.1.2011.5.25.187.5.49 |
MIB |
HUAWEI-PTP-MIB |
Alarm ID |
0x00F1037f |
Alarm Name |
hwPtpPassiveMeasureOverflow |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Clear |
Match trap |
PTP_1.3.6.1.4.1.2011.5.25.187.5.48 hwPtpPassiveMeasureOverflow |
| Parameter | Description |
|---|---|
hwPtpPortName |
Name of the current port. |
hwPtpPortIfIndex |
Index of the current port. |
hwPtpPortRingFiberLengthChangeValue |
New time offset caused by the fiber length change of the current port. (unit: ns) |
hwPtpPortRingFiberLengthChangeValueFlag |
Plus or minus sign of the new time offset caused by the fiber change of the current port. The value can be: Minus sign (0). Positive sign (1). |
hwPtpPassiveAlarmThreshold |
Passive monitoring threshold configured on the current device. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.187.2.1.1.43 |
hwPtpPortName |
hwPtpPortIfIndex |
1.3.6.1.4.1.2011.5.25.187.2.1.1.45 |
hwPtpPortRingFiberLengthChangeValue |
hwPtpPortIfIndex |
1.3.6.1.4.1.2011.5.25.187.2.1.1.46 |
hwPtpPortRingFiberLengthChangeValueFlag |
hwPtpPortIfIndex |
1.3.6.1.4.1.2011.5.25.187.1.92 |
hwPtpPassiveAlarmThreshold |
- |