QOS_1.3.6.1.4.1.2011.5.25.132.3.5 hwhqosPortQueueStatDiscardAlarmTrap

Trap Buffer Description

On interface [interface-name],[queue] in queue [discard-type] is [discard-value],it reached alarm-threshold.

The alarm is generated if the number of dropped packets or bytes or the packet loss rate is larger than the configured threshold.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwhqosPortQueueStatDiscardAlarmTrap
Trap OID	1.3.6.1.4.1.2011.5.25.132.3.5
MIB	HUAWEI-HQOS-MIB
Alarm ID	0x00F10068
Alarm Name	hwhqosPortQueueStatDiscardAlarmTrap
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	QOS_1.3.6.1.4.1.2011.5.25.132.3.6 hwhqosPortQueueStatDiscardAlarmResume

Trap Buffer Parameters

Parameter	Description
interface-name	Interface name.
queue	Queue index.
discard-type	Discard type.
discard-value	Discard value.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.132.1.66.1.1	hwhqosPortQueueInterfaceTrap	hwhqosPortQueueInterfaceTrap hwhqosPortQueueCosValueTrap hwhqosPortQueueDiscardTypeTrap hwhqosPortQueueDiscardValueTrap
1.3.6.1.4.1.2011.5.25.132.1.66.1.2	hwhqosPortQueueCosValueTrap	hwhqosPortQueueInterfaceTrap hwhqosPortQueueCosValueTrap hwhqosPortQueueDiscardTypeTrap hwhqosPortQueueDiscardValueTrap
1.3.6.1.4.1.2011.5.25.132.1.66.1.3	hwhqosPortQueueDiscardTypeTrap	hwhqosPortQueueInterfaceTrap hwhqosPortQueueCosValueTrap hwhqosPortQueueDiscardTypeTrap hwhqosPortQueueDiscardValueTrap
1.3.6.1.4.1.2011.5.25.132.1.66.1.4	hwhqosPortQueueDiscardValueTrap	hwhqosPortQueueInterfaceTrap hwhqosPortQueueCosValueTrap hwhqosPortQueueDiscardTypeTrap hwhqosPortQueueDiscardValueTrap

Impact on the System

Services may be affected when large numbers of packets or bytes are lost.

Possible Causes

After the alarm function is enabled using the port-queue-alarm discard command, an alarm is generated when the number of discarded packets, number of discarded bytes, or packet loss rate in the port queue is greater than or equal to the alarm threshold in a specified period.

Procedure

Collect alarm information, log information and configuration information, and then contact technical support personnel.