QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.105 hwXQoSModeChannelOverPortShapAlarm

Trap Buffer Description

The channelization bandwidth configured on the interface [interface-name] exceeds the port shaping value.

The channelization bandwidth exceeds the port shaping value.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwXQoSModeChannelOverPortShapAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.32.4.1.11.105
MIB	HUAWEI-XQoS-MIB
Alarm ID	0x00f103ab
Alarm Name	hwXQoSModeChannelOverPortShapAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	QOS_1.3.6.1.4.1.2011.5.25.32.4.1.11.106 hwXQoSModeChannelOverPortShapAlarmClear

Trap Buffer Parameters

Parameter	Description
interface-name	Mode channel interface name.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.32.4.1.68.1.1.1	hwXQoSModeChannelOverPortShapAlarmIfIndex	hwXQoSModeChannelOverPortShapAlarmIfIndex

Impact on the System

Packet loss may occur on the mode channel.

Possible Causes

The channelization bandwidth configured on the interface exceeds the port shaping value.

Procedure

1.Run the mode channel bandwidth bandwidth-value command in the interface view to decrease the channelization bandwidth to a value lower than the port shaping value.

Check whether the alarm is cleared.

If yes, go to 3.
If no, go to 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.