The number of IPv4 prefixes fell below the maximum value. (PrefixCount=[PrefixCount], MaxValue=[MaxValue])
| Trap Attribute | Description | 
|---|---|
| Alarm or Event | Alarm | 
| Trap Severity | Critical | 
| Mnemonic Code | hwIpv4PrefixExceed | 
| Trap OID | 1.3.6.1.4.1.2011.5.25.145.10.2 | 
| MIB | HUAWEI-RM-EXT-MIB | 
| Alarm ID | 0x08390004 | 
| Alarm Name | hwIpv4PrefixExceed | 
| Alarm Type | qualityOfServiceAlarm | 
| Raise or Clear | Clear | 
| Match trap | 
| Parameter | Description | 
|---|---|
| PrefixCount | Indicates the number of IPv4 route prefixes in the routing table. | 
| MaxValue | Indicates the maximum number of IPv4 route prefixes supported by the device. | 
| VB OID | VB Name | VB Index | 
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.145.8.1 | hwCurIpv4PrefixNum | - | 
| 1.3.6.1.4.1.2011.5.25.145.8.2 | hwIpv4PrefixLimitValue | - | 
The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes. As a result, the number of IPv4 prefixes fell below the maximum value. Configure route limit and prefix limit at the same time, set prefix limit to the smaller value.