RM_1.3.6.1.4.1.2011.5.25.145.10.4 hwIpv4PrefixThresholdExceedClear

Trap Buffer Description

The number of IPv4 prefixes fell below the threshold. (PrefixCount=[PrefixCount], MaxValue=[MaxValue], ThresholdLowerLimit=[ThresholdLowerLimit], ThresholdUpperLimit=[ThresholdUpperLimit])

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwIpv4PrefixThresholdExceed
Trap OID	1.3.6.1.4.1.2011.5.25.145.10.4
MIB	HUAWEI-RM-EXT-MIB
Alarm ID	0x08390006
Alarm Name	hwIpv4PrefixThresholdExceed
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Clear
Match trap	RM_1.3.6.1.4.1.2011.5.25.145.10.3 hwIpv4PrefixThresholdExceed

Trap Buffer Parameters

Parameter	Description
PrefixCount	Indicates the number of IPv4 route prefixes in the routing table.
MaxValue	Indicates the maximum number of IPv4 route prefixes supported by the device.
ThresholdLowerLimit	Indicates the lower threshold of IPv4 route prefixes.
ThresholdUpperLimit	Indicates the upper threshold of IPv4 route prefixes.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.145.8.1	hwCurIpv4PrefixNum	-
1.3.6.1.4.1.2011.5.25.145.8.2	hwIpv4PrefixLimitValue	-
1.3.6.1.4.1.2011.5.25.145.8.3	hwIpv4PrefixLowerLimitValue	-
1.3.6.1.4.1.2011.5.25.145.8.4	hwIpv4PrefixUpperLimitValue	-

Impact on the System

The alarm of the number of IPv4 route prefixes exceeded the alarm threshold is cleared.

Possible Causes

The number of IPv4 prefixes fell below the clear alarm threshold.

Procedure

This alarm message is informational only, and no action is required.