The number of IPv6 prefixes exceeded the maximum value. (PrefixCount=[PrefixCount], MaxValue=[MaxValue])
The number of IPv6 prefixes exceeded the maximum value.
Trap Attribute | Description |
---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwIpv6PrefixExceed |
Trap OID |
1.3.6.1.4.1.2011.5.25.145.11.1 |
MIB |
HUAWEI-RM-EXT-MIB |
Alarm ID |
0x08390005 |
Alarm Name |
hwIpv6PrefixExceed |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
Parameter | Description |
---|---|
PrefixCount |
Indicates the number of IPv6 route prefixes in the routing table. |
MaxValue |
Indicates the maximum number of IPv6 route prefixes supported by the device. |
VB OID | VB Name | VB Index |
---|---|---|
1.3.6.1.4.1.2011.5.25.145.9.1 |
hwCurIpv6PrefixNum |
- |
1.3.6.1.4.1.2011.5.25.145.9.2 |
hwIpv6PrefixLimitValue |
- |
1. Run the display ipv6 routing-table statistics command to check the number of IPv6 public route prefixes and the display ipv6 routing-table all-vpn-instance statistics command to check the number of IPv6 VPN route prefixes.
2. Check whether the number of route prefixes of each protocol is within the normal range.
3. Delete unneeded IPv6 routes and then check whether the alarm persists.
4. Collect alarm information and configuration information, and then contact technical support personnel.
5. End.