SYSTEM_1.3.6.1.4.1.2011.5.25.219.2.11.1 hwSystemConfigError-144134

Trap Buffer Description

A system configuration error occurs. ( EntityTrapFaultID = [EntityTrapFaultID])

The system configuration is incorrect.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwSystemConfigError
Trap OID	1.3.6.1.4.1.2011.5.25.219.2.11.1
MIB	HUAWEI-ENTITY-TRAP-MIB
Alarm ID	0x0D300004
Alarm Name	hwSystemConfigError
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	SYSTEM_1.3.6.1.4.1.2011.5.25.219.2.11.2 hwSystemConfigResume-144134

Trap Buffer Parameters

Parameter	Description
EntityTrapFaultID	Trap error code: 144128: The PAF version is inconsistent with the version of the startup software package. 144129: The boards and subcards of the device are not inserted into the corresponding slots. 144130: The versions of the active and standby main control boards are inconsistent. 144133: The memory of the active main control board is inconsistent with that of the standby main control board. 144134: The PTN startup mode does not match the mode selected during license activation.

Parameter

Description

EntityTrapFaultID

Trap error code:

144128: The PAF version is inconsistent with the version of the startup software package.
144129: The boards and subcards of the device are not inserted into the corresponding slots.
144130: The versions of the active and standby main control boards are inconsistent.
144133: The memory of the active main control board is inconsistent with that of the standby main control board.
144134: The PTN startup mode does not match the mode selected during license activation.

VB Parameters

None

Impact on the System

If the startup mode (dcn-management-plane mode or dcn-control-plane mode) does not match the mode selected during license activation, services in the mode selected during license activation may not take effect.

Possible Causes

The PTN start mode is inconsistent with that defined in the activated license.

Procedure

The configured startup mode (dcn-management-plane mode or dcn-control-plane mode) does not match the mode selected when the license is activated.

1. Run the display ptn-mode command to check the configured startup mode.

2. Run the active mode-control license or undo active mode-control license command to change the startup mode to be the same as that specified in the license file.

3. The device is restarted, and the NMS needs to reconnect to the device.

4. End.