delay-measure one-way threshold

Format

delay-measure one-way threshold threshold-value

undo delay-measure one-way threshold

Parameters

Parameter	Description	Value
threshold-value	Sets an alarm threshold for one-way frame delay measurement.	The value is an integer ranging from 1 to 4294967295, in microseconds.

Parameter

Description

Value

threshold-value

Sets an alarm threshold for one-way frame delay measurement.

The value is an integer ranging from 1 to 4294967295, in microseconds.

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

To set an alarm threshold for one-way frame delay measurement that monitors link quality, run the delay-measure one-way threshold command. If the delay exceeds the configured threshold, an alarm is generated and sent to the NMS. An administrator obtains alarm information and takes measures to rectify the fault that causes the delay to ensure service quality.

The delay-measure one-way threshold command can be used in the VLAN scenario.

Prerequisites

An MD and an MA have been created using the cfm md and ma commands, respectively.

Example

# Set an alarm threshold for one-way frame delay measurement to 10 in VLAN scenarios.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] map vlan 100
[*HUAWEI-md-md1-ma-ma1] delay-measure one-way threshold 10