delay-measure two-way threshold

Function

The delay-measure two-way threshold command sets an alarm threshold for two-way frame delay measurement.

The undo delay-measure two-way threshold command removes the alarm threshold set for two-way frame delay measurement.

By default, no alarm threshold is configured for two-way frame delay measurement.

Format

delay-measure two-way threshold threshold-value

undo delay-measure two-way threshold

Parameters

Parameter	Description	Value
threshold-value	Specifies the alarm threshold of two-way frame delay measurement.	The value is an integer ranging from 1 to 4294967295, in microseconds

Parameter

Description

Value

threshold-value

Specifies the alarm threshold of two-way frame delay measurement.

The value is an integer ranging from 1 to 4294967295, in microseconds

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

The delay-measure two-way threshold command sets a delay threshold on a network enabled with two-way frame delay measurement. If the delay time exceeds the configured threshold, an alarm is generated and sent to the NMS. An administrator obtains alarm information and takes measures to rectify the fault that causes the delay to ensure service quality.

The delay-measure two-way threshold command can be used in the VLAN scenario.

Prerequisites

The cfm md md-name command has been run to configure an MD, and the ma ma-name command has been run to configure an MA.

Example

# Set the alarm threshold for two-way frame delay measurement in the VLAN to 10.

<HUAWEI> system-view
[~HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] map vlan 100
[*HUAWEI-md-md1-ma-ma1] delay-measure two-way threshold 10