ccc description

Function

The ccc description command configures a description for a circuit cross connect (CCC) connection.

The undo ccc description command deletes the description of a CCC connection.

By default, no description is configured for a CCC connection.

Format

ccc cccName description text

undo ccc cccName description

Parameters

Parameter	Description	Value
cccName	Specifies the name of a CCC connection.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. The string can contain spaces if it is enclosed in double quotation marks.
description text	Specifies the description of a CCC.	The value is a string of 1 to 128 case-sensitive characters, spaces not supported.The string cannot start at or end with a blink space.

Parameter

Description

Value

cccName

Specifies the name of a CCC connection.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

The string can contain spaces if it is enclosed in double quotation marks.

description text

Specifies the description of a CCC.

The value is a string of 1 to 128 case-sensitive characters, spaces not supported.The string cannot start at or end with a blink space.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

On CCC virtual private wire service (VPWS) networks, to configure a description for a CCC connection, run the ccc description command. The description is easy to understand and maintain, facilitating VPWS network management.

Example

# Configure the description for a CCC connection as 34.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] ccc ccc1 interface GigabitEthernet 0/1/0 out-interface GigabitEthernet 0/1/8
[*HUAWEI] ccc ccc1 description 34