next sid label

Function

The next sid label command sets a next-hop label on an explicit path to be established using labels configured in sequence.

The undo next sid label command deletes a specified next-hop label from an explicit path.

By default, no next-hop label is specified on an explicit path.

Format

next sid label label-value type { adjacency | prefix | binding-sid }

undo next sid label label-value [ type { adjacency | prefix | binding-sid } ]

Parameters

Parameter	Description	Value
label-value	Specifies a label value.	The value is an integer ranging from 16 to 1048575.
type	Specifies a label type.	-
adjacency	Indicates an adjacency label.	-
prefix	Indicates a node label.	-
binding-sid	Indicates a binding SID.	-

Views

Explicit path view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

To set a next-hop label on an explicit path to be established using labels configured in sequence, run the next sid label command.

Prerequisites

MPLS TE has been enabled using the mpls te command in the MPLS view.

Follow-up Procedure

Run the display explicit-path command to view information about the explicit path.

Example

# Set an adjacency label to 284689 for an SR-MPLS TE explicit path.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] explicit-path path1
[*HUAWEI-explicit-path-path1] next sid label 284689 type adjacency