| Parameter | Description | Value |
|---|---|---|
| session session-id |
Specifies the ID of a session for which the trial running of the configuration is to be disabled. |
The value is an integer ranging from 0 to 65535. |
| persist persistId |
Specifies a persistence ID for a configuration trial run. |
The value is a string of 1 to 256 case-sensitive characters. It can be any visible ASCII characters excluding spaces. If double quotation marks are used around the tag name, spaces are allowed in the tag name. The value cannot start with a digit and cannot be a hyphen (-). |
Usage Scenario
In two-phase validation mode, you can run the commit trial command to enable configuration trial run after a configuration command is configured. You can also specify the time parameter in the commit trial command to set the timeout period of the trial run. After the trial run times out, the system configuration is automatically rolled back to the state before the trial run. Before the trial run times out, you can run the abort trial command to stop the trial run and roll back the system configuration to the state before the trial run. You can also specify the session parameter in the abort trial command to specify a session to end the trial run initiated by the session. You can specify the persistentId parameter to end the persistent configuration trial run.
Prerequisites
The commit trial command has been run for a configuration.
Configuration Impact
After the trial running of the configuration is disabled, the system configuration rolls back to the configuration state before the trial running.
Precautions
The abort trial command must be run in the two-phase configuration validation mode.
<HUAWEI> system-view [~HUAWEI] sysname rollback [*HUAWEI] commit trial 120 Committing..done. Info: The system enters the trial configuration mode. The system will revert to previous configuration if the trial configuration is not confirmed in 120 seconds. [*rollback] abort trial Warning: The trial configuration will be rolled back. Continue? [Y/N]:y
[~HUAWEI] sysname hello [*HUAWEI] commit trial Info: The system enters the trial configuration mode. The system will revert to previous configuration if the trial configuration is not confirmed in 600 seconds. [~hello] abort trial session ? 392 Session in trial configuration mode [~hello] abort trial session 392 Warning: The trial configuration will be rolled back. Continue? [Y/N]:Y Info: The trial configuration rollback succeeded. [~HUAWEI]
[~HUAWEI] sysname hello [*HUAWEI] commit trial persist abc Info: The system enters the trial configuration mode. The system will revert to previous configuration if the trial configuration is not confirmed in 600 seconds. [~hello] abort trial persist abc Warning: The trial configuration will be rolled back. Continue? [Y/N]:Y Info: The trial configuration rollback succeeded. [~HUAWEI]