source-ip

Function

The source-ip command specifies a source IP address in an IP address verification list.

The undo source-ip command deletes a source IP address from an IP address verification list.

By default, no source IP address is specified in an IP address verification list.

Format

source-ip ip-addr

undo source-ip ip-addr

Parameters

Parameter	Description	Value
ip-addr	Specifies the source IPv4 address.	The value is in dotted decimal notation.

Parameter

Description

Value

ip-addr

Specifies the source IPv4 address.

The value is in dotted decimal notation.

Views

MPLS-in-UDP-list view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mplsinudp	write

Usage Guidelines

Usage Scenario

Source IP address verification secures MPLS-in-UDP tunnels. To specify a source IP address in an IP address verification list, run the source-ip command.

Example

# Specify a source IP address in an IP address verification list.

<HUAWEI> system-view
[~HUAWEI] mpls-in-udp
[*HUAWEI-mpls-in-udp] source-ip-validate list destination-ip 1.1.1.1
[*HUAWEI-mpls-in-udp-list-1.1.1.1] source-ip 2.2.2.2