entropy-label enable

Function

The entropy-label enable command enables the LDP entropy label capability on the ingress of an LSP.

The undo entropy-label enable command restores the default configuration.

By default, no LDP entropy label is configured on the ingress of an LSP.

Format

entropy-label enable

undo entropy-label enable

Parameters

None

Views

MPLS-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

The entropy label is configured to address the severe load imbalance on a network. An LDP entropy label is configured using the entropy-label enable command on the ingress of an LSP, and an LDP tunnel with the entropy label capability enabled is negotiated using LDP. Then forwarding entries carry the flag supporting the entropy label capability to implement load balancing.

Example

# Configure the LDP entropy label capability on the ingress of an LSP.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls ldp
[*HUAWEI-mpls-ldp] entropy-label enable