remote-peer auto-dod-request

Function

The remote-peer auto-dod-request command automatically triggers a request to a downstream node for Label Mapping messages associated with all remote LDP peers in DoD mode.

The undo remote-peer auto-dod-request command restores the default setting.

By default, this function is disabled.

Format

remote-peer auto-dod-request

undo remote-peer auto-dod-request

Parameters

None

Views

MPLS-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

Usually the devices at the edge of an MPLS network are low-end devices. On a large-scale network with a large number of remote peers, configure the DSLAMs in order to ensure the stable operation of the network and to save system resources. Run the remote-peer auto-dod-request command to configure the automatic triggering of a request to a downstream node for Label Mapping messages associated with all remote LDP peers in DoD mode.

There are some precautions as following:

Set up a remote LDP session before running the remote-peer auto-dod-request command.
Run the longest-match command to configure LDP over TE before running the remote-peer auto-dod-request command.
Run the mpls ldp advertisement dod command to create an LDP session with a downstream node in DoD mode before running the remote-peer auto-dod-request command.

Example

# Enable the automatic triggering of a request to a downstream node for Label Mapping messages associated with all remote LDP peers in DoD mode.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls ldp
[*HUAWEI-mpls-ldp] remote-peer auto-dod-request