proxy-egress disable

Function

The proxy-egress disable command disables a device from establishing proxy egress LSPs.

The undo proxy-egress disable command enables a device to establish proxy egress LSPs.

A device is enabled to establish proxy egress LSPs by default.

Format

proxy-egress disable

undo proxy-egress disable

Parameters

None

Views

MPLS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-ldp	write

Usage Guidelines

Usage Scenario

If a policy allows a device to use all static and IGP routes to establish LSPs or use an IP address prefix list to establish LSPs, the policy also triggers proxy egress LSP establishment. However, the proxy egress LSPs may be unavailable, which wastes system resources. To prevent this problem, run the proxy-egress disable command to disable a device from establishing such proxy egress LSPs.

Prerequisites

MPLS has been enabled using the mpls command.

Example

# Disable a device from establishing proxy egress LSPs in the MPLS view.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] proxy-egress disable